• GBD videos on vimeo
  • subscribe : rss feed
  • Entry

    New Aquavitro Salinity Salt from Seachem

    Aquavitro’s new Salinity salt is aimed at the natural seawater parameter (NSW) crowd which is popular among ULNS users. Aquavitro is Seachem’s new brand that is aimed at the advanced aquarist. Many of the products are improvements or spin offs from the original Seachem line. Salinity salt mix is no different. Seachem gaurantees that Salinity [...]

    Aquavitro Salinity

    Aquavitro’s new Salinity salt is aimed at the natural seawater parameter (NSW) crowd which is popular among ULNS users. Aquavitro is Seachem’s new brand that is aimed at the advanced aquarist. Many of the products are improvements or spin offs from the original Seachem line. Salinity salt mix is no different. Seachem gaurantees that Salinity contains  ”everything you want in a salt and nothing you don’t.”  Using EPA Standard Method 6010 Salinty is guranteed to mix at:

    • 8.8 pH
    • 9.8 dkH
    • 1265 ppm Magnesium
    • 437 ppm Calcium
    • 383 ppm Potassium

    (Note: given the relatively low amounts we are assuming 1ppm = 1 mg/L)

    The biggest question is at what salinity? At 1.025 Reef Salt has been mixing at 500ppm calcium, well above the 380-430 ppm that SeaChem lists for their 1.021-1.025 specific gravity range.  

    Salinity Salt Analysis

    Salinity’s listed analysis shows 5ppm less Calcium than ReefSalt, but in both cases salinity / specific gravity measurements are not given by Seachem. Most interesting is the increase in heavy metals like Copper and Zince–two heavy metals that can increase coral coloration via toxicity and zooxanthellae expulsion. Reef salt previously listed Cu at 0.0003 and Zinc at 0.0107. Meanwhile Salinity shows over 150 times that for copper and 4 times that for Zinc. Cobalt is increased 200 times in Salinity as well.  

    These levels are elevated from NSW, which is not uncommon in synthetic salt mixes (No salt study is without debate… see Shimek Inland Salt Study). But it is interesting as that they are so different than the Seachem line of salt.

    Salinity

    We’re hoping the early numbers are based on 1.025 specific gravity. We’re also hoping the clouding and elevated calcium issues we’ve  been experiencing over the past couple buckets of Reef Salt are resolved. High hopes for Aquavitro’s Salinity Salt, can’t wait to try it.

    Related Posts

    1. MACNA XXI : Aquavitro Salinity Salt
    2. Seachem | Reef Salt Calcium Level
    3. Brightwell NeoMarine Salt Sparks Debate
    4. Reef News | Carp Dies, RK Mag, WebCam, Profilux 12v, Lionfish, Aquavitro Salinity in Boxes?
    5. Seachem | Aquavitro Initial Dosing and Usage
    • charles

      Looks like this salt mix wont have the elevated borate levels? Or are borate and boron different things?

      If it doesn’t have the elevated levels that SCRS had, I’d be pretty interested in this salt.

    • http://reefcentral.com/forums/showthread.php?s=&th Mike Clifford

      What’s the reason for the 8.8 pH? Seems very high.

    • Scott

      If this salt is trying to mimic NSW I would assume they tested this salt at 35ppt. The same as NSW.

    • Nicholas Sadaka

      For the Low Nutrient crowd like myself (Zeo User), the alkalinity is way too high at 9.8dKH. That seems to always be one of the hardest parameters for them to match for us. That and the potassium, but looks like they’re good with that parameter.

    • http://glassbox-design.com eric michael

      @Nicholas, I keep my dkh at 7. The 2.8 elevation equates to only 20ppm in calcium which puts it spot in with the calcium range of 400-420ppm.

      Although it is higher, with under 20% water changes the elevated alkalinity should not be a major concern. That said, I would prefer 7dkh and 417ppm Ca out of the bucket.

    • Nicholas Sadaka

      You’re right Eric…it’s generally a minor difference for the most part, but it does seem to help a lot picking a salt who’s parameters fall right in line with what you’re shooting for…especially since that’s such a key factor in success with Zeovit and probably the other low nutrient systems as well. I’m very interested what people have to say about this salt as well as the NeoMarine salt who’s #’s appear right in line with the low nutrient systems and appears to be pretty well affordable also.

    • http://glassbox-design.com/2009/brightwell-neomarine-salt/ Brightwell NeoMarine Salt Sparks Debate | glassbox-design.com

      [...] will have its lovers and haters. We do plan on testing the salt at some point. The same goes for Seachem’s Salinity salt that is under their Aquavitro line. What we do know now is Brightwell certainly knew it was [...]

    blog comments powered by Disqus